This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
  • World IconEnglish
  • Home: New Products

    RADM-23C - 1U LED Multi Colour Rack Light NEW!

    Image of RADM-23C
    1U LED Multi Colour Rack Light ror use in 19 inch equipment racks and can be fitted at the front or back of the rack. Colour and Pattern programming is via push buttons on the top of the case.

    -15 x RGB LED
    -Beam Angle 120 degrees ...

    RADM-23C - 1U LED Multi Colour Rack Light NEW!

    Image of RADM-23C
    Image of RADM-23C Image of RADM-23C Image of RADM-23C Image of RADM-23C
    1U LED Multi Colour Rack Light ror use in 19 inch equipment racks and can be fitted at the front or back of the rack. Colour and Pattern programming is via push buttons on the top of the case.

    -15 x RGB LED
    -Beam Angle 120 degrees
    -IP Rating 65 (moisture resistant)
    -LED Type SMD5050
    -12V DC Operation - 300mA
    -500mA universal PSU supplied

    Part No.FinishDescriptionWeight
    RADM-23CBlack1U LED Multi Colour Rack Light NEW! 0.81kg/1.79lb

    PDU-XX-6 - PDU with Overload & Surge Protection NEW!

    Image of PDU-XX-6
    19 inch Rack Mount 6 Way Power Distribution Unit with On/Off overload trip switch, along with master surge and lightening protection plus a LED condition indicator.

    PDU-XX-6 - PDU with Overload & Surge Protection NEW!

    Image of PDU-XX-6
    Image of PDU-XX-6 Image of PDU-XX-6 Image of PDU-XX-6
    19 inch Rack Mount 6 Way Power Distribution Unit with On/Off overload trip switch, along with master surge and lightening protection plus a LED condition indicator.


    Part No.RegionCablePlugs
    PDU-UK-6UK NEW! 2mUK
    PDU-AM-6USA NEW! 6ftType B
    PDU-EU-6Europe NEW! 2mShucko
    PDU-AU-6Australia NEW! 2mType 1

    FT80-Q - Quiet Closets Cooling Unit NEW!

    Image of FT80-Q
    Quiet exhaust fan unit designed to be fitted into sealed wooden cabinets, closets and enclosed equipment racks where hot air is not being expelled. These type of situations invariably cause thermal failure, as the in-board fans are just recycling hot...

    FT80-Q - Quiet Closets Cooling Unit NEW!

    Image of FT80-Q
    Image of FT80-Q Image of FT80-Q Image of FT80-Q
    Quiet exhaust fan unit designed to be fitted into sealed wooden cabinets, closets and enclosed equipment racks where hot air is not being expelled. These type of situations invariably cause thermal failure, as the in-board fans are just recycling hot air.

    These exhaust fans are easily fitted into any wooden enclosures all that is required is a an awl, cross head screwdriver and a 79mm / 3 1/8" Hole Cutter.

    Once mounted just hook-up to the 12V universal PSU via the input socket.
    A second unit can also be run from the 500mA power supply by using a CRC-LINK cable.

    A thermal sensor accessory, the CRC-TEMP can be Plugged into the TEMP socket.

    Technical Specifications:
    · Dimensions: 100mm x 100mm x 25mm / 4" x 4" x 1"
    · Low Noise 22.5dBA (0.3 Sone)
    · 28CFM (47.6m³/h) @2000 RPM
    · High Static Pressure
    · 1 x 9 Bladed 80mm / 3.15" Fan
    · 12V DC - 200mA
    · 2 x DC In/Out Sockets
    · Temperature Sensor Socket
    · DC in/out sockets
    · 500mA universal PSU supplied
    · Mounting Holes align with attached fitting template

    · Fluid Bearings = 2 Year Limited Warrantee

    Part No.DescriptionWeight
    FT80-QQuiet Closet Cooling Unit NEW! 0.4kg/0.88lb

    SP-1000 Airpower Rivet Tool NEW!

    Image of SP-1000
    A powerful pneumatic blind rivet gun for mounting on aluminium, metal and wood. With this pneumatic blind rivet gun, blind rivets can be easily fixed without having to use manual power. The pneumatic blind rivet gun will reduce assemble time and incr...

    SP-1000 Airpower Rivet Tool NEW!

    Image of SP-1000
    A powerful pneumatic blind rivet gun for mounting on aluminium, metal and wood. With this pneumatic blind rivet gun, blind rivets can be easily fixed without having to use manual power. The pneumatic blind rivet gun will reduce assemble time and increase productivity.

    To use with 4mm and 5mm rivets (3/16")

    Air-pressure: 4-7 bar
    Part No.DescriptionWeight
    SP-1000Airpower Rivet Tool NEW! 1.7kg/3.75lb

    W0985-AUTO - W0990-AUTO - Automatic Castors NEW!

    Image of W0985-AUTO - W0990-AUTO
    100mm / 4" Automatic Castor with Rubber Blue Wheel
    Wheel Width: 27mm / 1"

    Our new automatic castors are equipped with a unique self-centerin...

    W0985-AUTO - W0990-AUTO - Automatic Castors NEW!

    Image of W0985-AUTO - W0990-AUTO
    Image of W0985-AUTO - W0990-AUTO Image of W0985-AUTO - W0990-AUTO
    100mm / 4" Automatic Castor with Rubber Blue Wheel
    Wheel Width: 27mm / 1"

    Our new automatic castors are equipped with a unique self-centering rig that allows the castor to lock back into place when no downward force is applied to it.

    Just pick up your case and the castor will automatically fall back into place, making stacking cases children's play.

    Carrying Weight per Wheel: 200kg / 440Lb

    Works with Castor Plate W0094 and universal wheel plate W8980.

    Material: Steel/Rubber
    Part No.FinishDescription
    W0990-AUTOZincAutomatic Swivel Castor with 100mm / 4" Blue Wheel . Wheel Width: 27mm / 1" NEW!
    W0985-AUTOZincAutomatic Braked Swivel Castor with 100mm / 4" Blue Wheel . Wheel Width: 27mm / 1" NEW!

    W9000-AUTO - W9008-AUTO - Automatic Castors NEW!

    Image of W9000-AUTO - W9008-AUTO
    100mm / 4" Heavy Duty Automatic Castor with Rubber Blue Wheel
    Wheel Width: 36mm / 1.4"

    Our new automatic castors are equipped with a unique ...

    W9000-AUTO - W9008-AUTO - Automatic Castors NEW!

    Image of W9000-AUTO - W9008-AUTO
    Image of W9000-AUTO - W9008-AUTO Image of W9000-AUTO - W9008-AUTO
    100mm / 4" Heavy Duty Automatic Castor with Rubber Blue Wheel
    Wheel Width: 36mm / 1.4"

    Our new automatic castors are equipped with a unique self-centering rig that allows the castor to lock back into place when no downward force is applied to it.

    Just pick up your case and the castor will automatically fall back into place, making stacking cases children's play.

    Carrying Weight per Wheel: 250kg / 550Lb

    Works with Castor Plate W0094 and universal wheel plate W8980.

    Part No.FinishDescription
    W9000-AUTOZincHeavy Duty Automatic Swivel Castor with 100mm / 4" Blue Wheel . Wheel Width: 36mm / 1.4" NEW!
    W9008-AUTOZincHeavy Duty Automatic Braked Swivel Castor with 100mm / 4" Blue Wheel . Wheel Width: 36mm / 1.4" NEW!

    H2026 NEW!

    Image of H2026
    Corner Handle

    H2026 NEW!

    Image of H2026
    Image of H2026 Image of H2026
    Corner Handle
    Material: Steel
    Part No.FinishDescriptionWeight
    H2026ZZincCorner Handle NEW! 0.39kg/0.87lb
    H2026KBlackCorner Handle NEW! 0.39kg/0.87lb

    P1972BWCH NEW!

    Image of P1972BWCH
    Extra Large Strut Hinge with Bent Wire Form

    P1972BWCH NEW!

    Image of P1972BWCH
    Image of P1972BWCH Image of P1972BWCH
    Extra Large Strut Hinge with Bent Wire Form
    Part No.FinishDescription
    P1972BWCHChromeExtra Large Strut Hinge with Bent Wire Form

    T1560 NEW!

    Image of T1560
    Cable Ties with Hook and Loop Fastening Strips

    T1560 NEW!

    Image of T1560
    Image of T1560 Image of T1560
    Cable Ties with Hook and Loop Fastening Strips
    Part No.FinishWidthLength
    T1560-700Black25mm / 1"700mm / 27.56"

    R3300 - R3500 Soft Close Sliders NEW!

    Image of R3300 - R3500
    Soft Close Drawer Slides

    Sold in Pairs

    R3300 - R3500 Soft Close Sliders NEW!

    Image of R3300 - R3500
    Image of R3300 - R3500 Image of R3300 - R3500
    Soft Close Drawer Slides

    Sold in Pairs
    Part No.FinishClosed LengthExtension
    R3300ZZinc300mm / 11.81"300mm / 11.81"
    R3350ZZinc350mm / 13.78"350mm / 13.78"
    R3450ZZinc450mm / 17.72"450mm / 17.72"
    R3500ZZinc500mm / 19.69"500mm / 19.69"

    R6025 Shallow Wall Mount Rack NEW!

    Image of R6025
    Shallow wall mount rack, available threaded M6 or 10/32 UNF
    Depth: 250mm / 9.84"
    Lockable front door

    R6025 Shallow Wall Mount Rack NEW!

    Image of R6025
    Image of R6025 Image of R6025
    Shallow wall mount rack, available threaded M6 or 10/32 UNF
    Depth: 250mm / 9.84"
    Lockable front door

    M6 Rack Rail

    Part No.FinishSize (U)Height (H)
    R6025-M6-6UBlack6U362mm / 14.25"
    R6025-M6-9UBlack9U496mm / 19.53"
    R6025-M6-12UBlack12U629mm / 24.76"

    10/32 Rack Rail

    Part No.FinishSize (U)Height (H)
    R6025-1032-6UBlack6U362mm / 14.25"
    R6025-1032-9UBlack9U496mm / 19.53"
    R6025-1032-12UBlack12U629mm / 24.76"

    1811BP NEW!

    Image of 1811BP
    Backplate for 1811 Handles

    1811BP NEW!

    Image of 1811BP
    Image of 1811BP Image of 1811BP
    Backplate for 1811 Handles
    Part No.Description
    1811BPBackplate for 1811 Handles

    H1064BP NEW!

    Image of H1064BP
    Backplate for H1061 - H1064 Handles

    H1064BP NEW!

    Image of H1064BP
    Image of H1064BP Image of H1064BP
    Backplate for H1061 - H1064 Handles
    Part No.Description
    H1064BPBackplate for H1061 - H1064 Handles

    1071 NEW!

    Image of 1071
    Small Low Profile Flat Corner (16.5mm / 5/8" High)

    1071 NEW!

    Image of 1071
    Image of 1071 Image of 1071
    Small Low Profile Flat Corner (16.5mm / 5/8" High)
    Part No.FinishDescriptionWeight
    1071ZincSmall Low Profile Flat Corner (16.5mm / 5/8" High) NEW! 21g/0.74oz

    RWB In-Wall Rack Cabinets NEW!

    Image of RWB
    In wall rack cabinet for cavity walls.

    Available with M6 or 10/32 threaded rack rail.

    Lockable polycarbonate door

    RWB In-Wall Rack Cabinets NEW!

    Image of RWB
    Image of RWB Image of RWB Image of RWB Image of RWB
    In wall rack cabinet for cavity walls.

    Available with M6 or 10/32 threaded rack rail.

    Lockable polycarbonate door
    Material: Steel & Polycarbonate

    M6 Rack Rail

    Part No.FinishDescriptionWeight
    RWB-M6-08UK
    RWB-M6-08UCM
    Black
    Cream
    8U In Wall Rack Cabinet4kg/8.82lb
    RWB-M6-12UK
    RWB-M6-12UCM
    Black
    Cream
    12U In Wall Rack Cabinet5.5kg/12.13lb
    RWB-M6-16UK
    RWB-M6-16UCM
    Black
    Cream
    16U In Wall Rack Cabinet7kg/15.43lb

    10/32 Rack Rail

    Part No.FinishDescriptionWeight
    RWB-1032-08UK
    RWB-1032-08UCM
    Black
    Cream
    8U In Wall Rack Cabinet4kg/8.82lb
    RWB-1032-12UK
    RWB-1032-12UCM
    Black
    Cream
    12U In Wall Rack Cabinet5.5kg/12.13lb
    RWB-1032-16UK
    RWB-1032-16UCM
    Black
    Cream
    16U In Wall Rack Cabinet7kg/15.43lb

    R1606 Table Mounting Latch NEW!

    Image of R1606
    Table Mounting Latch.

    Allows a Flight Case Lid to be attached to the side of the Case, and used as a table.

    Works with ...

    R1606 Table Mounting Latch NEW!

    Image of R1606
    Image of R1606 Image of R1606
    Table Mounting Latch.

    Allows a Flight Case Lid to be attached to the side of the Case, and used as a table.

    Works with R1600, R1602, R1604 or 9967 Table Legs.
    Part No.FinishDescription
    R1606MZincMale: Latch NEW!
    R1606FZincFemale: Catch Plate NEW!

    B1121

    Image of B1121
    4 Hole Large Brace to cover all 30mm x 30mm / 1.18" x 1.18" Aluminium Extrusions.

    B1121

    Image of B1121
    Image of B1121 Image of B1121
    4 Hole Large Brace to cover all 30mm x 30mm / 1.18" x 1.18" Aluminium Extrusions.
    Material: 1.2mm / 18 gauge Steel

    2mm / 0.08" Internal Radius

    Part No.FinishInternal RadiusWeight
    B1121
    B1121 PE
    PennBrite2mm / 0.08"
    With Penn Elcom Logo
    23g/0.81oz
    B1121KBlack2mm / 0.08"23g/0.81oz

    5mm / 3/16" Internal Radius

    Part No.FinishInternal RadiusWeight
    B1121/R5ZPennBrite5mm / 3/16" NEW! 23g/0.81oz

    W8255

    Image of W8255
    Die-Cast Corner Castor with 50mm / 1.97" Wheel.

    Offset to suit extrusions up to 30mm / 1.18".

    W8255

    Image of W8255
    Image of W8255 Image of W8255
    Die-Cast Corner Castor with 50mm / 1.97" Wheel.

    Offset to suit extrusions up to 30mm / 1.18".
    Material: Die-Cast Zinc
    Part No.FinishDescription
    W8255ZZinc HousingWith Grey Wheel
    W8255KBlack HousingWith Grey Wheel NEW!

    CRC02-DTC - Thermo Exhaust Blower NEW!

    Image of CRC02-DTC
    2U Rack Mountable Digital Thermostatically Controlled Quiet Fan Exhaust unit, for use in 19” equipment racks.

    It has been designed be fitted in-between equipment or at the top of the rack to expel hot air efficiently and quietly.
    ...

    CRC02-DTC - Thermo Exhaust Blower NEW!

    Image of CRC02-DTC
    Image of CRC02-DTC Image of CRC02-DTC Image of CRC02-DTC Image of CRC02-DTC
    2U Rack Mountable Digital Thermostatically Controlled Quiet Fan Exhaust unit, for use in 19” equipment racks.

    It has been designed be fitted in-between equipment or at the top of the rack to expel hot air efficiently and quietly.

    Technical Specifications
    • Continuous temperature monitoring
    • Set & forget fan control
    • Fan run LED indicator
    • Over temperature alarm
    • Temperature Sensor Input Socket
    • Plug-in PTC sensor 1m lead
    • Low Noise (24.4 dBA)
    • 12V DC Operation - 500mA
    • 3 x 9 Bladed Swiss 120mm Fans
    • 220 CFM / 378m³/h
    • Japan made Fluid Bearings
    • Temperature Sensor Input Socket
    • DC in/out sockets
    • 1A universal PSU supplied
    • Dimensions (OD): 44.5mm x 483mm x 222mm / 1.75" x 19.02" x 8.74"

    Material: Steel
    Part No.FinishDescriptionWeight
    CRC02-DTCBlack Powder CoatedThermo Exhaust Blower1.4kg/3.09lb

    FT01Q-DTC - Thermostatic Fan Tray NEW!

    Image of FT01Q-DTC
    Digitally controlled version of our long standing popular FT01Q fan tray.

    1U Rack Mountable Digital Thermostatically Controlled Quiet Fan Tray unit, for use in 19” equipment racks.

    It is designed be fitted at the top of the ...

    FT01Q-DTC - Thermostatic Fan Tray NEW!

    Image of FT01Q-DTC
    Image of FT01Q-DTC Image of FT01Q-DTC
    Digitally controlled version of our long standing popular FT01Q fan tray.

    1U Rack Mountable Digital Thermostatically Controlled Quiet Fan Tray unit, for use in 19” equipment racks.

    It is designed be fitted at the top of the rack to move hot air up through the rack as required.

    Technical Specifications
    • Continuous temperature monitoring
    • Over temperature alarm
    • Plug-in PTC sensor 1m / 39" lead
    • Low Noise (22.5 dBA)
    • 12V DC Operation - 500mA
    • 3 x 9 Bladed Swiss 120mm Fans
    • 220 CFM / 378m³/h
    • Japan made Fluid Bearings
    • Temperature Sensor Input Socket
    • DC in/out sockets
    • 1A universal PSU supplied
    • Dimensions: 44.5mm x 483mm x 222mm / 1.75" x 19.02" x 8.74"

    Material: Steel
    Part No.FinishDescriptionWeight
    FT01Q-DTCBlack Powder CoatedThermostatic Fan Tray1.4kg/3.09lb

    FT-DTC - Digital Thermostatic Controller NEW!

    Image of FT-DTC
    This 1U Rack Mountable Digital Thermostatic Controller can be used to monitor and control all of our low noise DC fan units: CoolRaC...

    FT-DTC - Digital Thermostatic Controller NEW!

    Image of FT-DTC
    Image of FT-DTC Image of FT-DTC
    This 1U Rack Mountable Digital Thermostatic Controller can be used to monitor and control all of our low noise DC fan units: CoolRaC, FT01Q, FT02-Q, FT Series Quiet Fan Trays and FP02-Q-3U.

    The digital thermostat module features: Continuous rack temperature monitoring, settable fan run temperature control with LED indicator and over temperature alarm.

    Technical Specifications
    • Continuous temperature monitoring
    • Set & forget fan control
    • Fan run LED indicator
    • Over temperature alarm
    • 12V DC Input & Output 2.1 Sockets
    • Switched 12V DC at Maximum of 4A
    • Temperature Sensor Input Socket
    • Plug-in PTC sensor 1m / 39" lead
    • Dimensions (OD): 44.5mm x 483mm x 70mm / 1.75" x 19.02" x 2.76"

    Material: Steel
    Part No.FinishDescriptionWeight
    FT-DTCBlackDigital Thermostatic Controller1kg/2.2lb

    M63810 - M63850 - EVA Foam NEW!

    Image of M63810 - M63850
    EVA foam – Black

    High Density Ethylene Vinyl Acetate Foam

    2.5m x 1.2m / 98" x 47"

    Other thicknesses available upon request.

    M63810 - M63850 - EVA Foam NEW!

    Image of M63810 - M63850
    EVA foam – Black

    High Density Ethylene Vinyl Acetate Foam

    2.5m x 1.2m / 98" x 47"

    Other thicknesses available upon request.
    Material: EVA38
    Part No.Thickness
    M6381010mm / 3/8"
    M6382020mm / 13/16"
    M6382525mm / 1"
    M6383030mm / 1.18"
    M6385050mm / 1.97"

    EX-6101 - EX-6201 - Laptop Drawers

    Image of EX-6101 - EX-6201
    Lockable Vented Laptop Drawers.

    Internal dimensions listed in the table.

    EX-6101 - EX-6201 - Laptop Drawers

    Image of EX-6101 - EX-6201
    Image of EX-6101 - EX-6201 Image of EX-6101 - EX-6201
    Lockable Vented Laptop Drawers.

    Internal dimensions listed in the table.
    Material: Steel
    Part No.FinishInternal Dimension (WxDxH)External Dimension (WxDxH)Weight
    EX-6101B
    EX-6101S
    EX-6101W
    Black
    Silver
    White
    350mm x 338mm x 50mm / 13.78" x 13.31" x 1.97"376mm x 446mm x 55mm / 14.8" x 17.56" x 2.17"3.48kg/7.68lb
    EX-6151B
    EX-6151S
    Black
    Silver
    450mm x 338mm x 50mm / 17.72" x 13.31" x 1.97"476mm x 446mm x 55mm / 18.74" x 17.56" x 2.17"3.93kg/8.66lb
    EX-6171B
    EX-6171S
    Black
    Silver
    550mm x 338mm x 50mm / 21.65" x 13.31" x 1.97"576mm x 446mm x 55mm / 22.68" x 17.56" x 2.17"4.38kg/9.65lb
    EX-6201B
    EX-6201S
    Black
    Silver
    450mm x 338mm x 75mm / 17.72" x 13.31" x 2.95"480mm x 446mm x 80mm / 18.9" x 17.56" x 3.15"

    PDU-XX-20B - 20 Way Vertical PDU NEW!

    Image of PDU-XX-20B
    20 way vertical PDU with 3m/118" mains cable with 16A C-FORM power connector.
    They feature 2 banks of 10 sockets each with 8A on/off overload trip switch, along with master surge and lightening protection plus a LED condition indicator.

    PDU-XX-20B - 20 Way Vertical PDU NEW!

    Image of PDU-XX-20B
    Image of PDU-XX-20B Image of PDU-XX-20B Image of PDU-XX-20B Image of PDU-XX-20B
    20 way vertical PDU with 3m/118" mains cable with 16A C-FORM power connector.
    They feature 2 banks of 10 sockets each with 8A on/off overload trip switch, along with master surge and lightening protection plus a LED condition indicator.
    Part No.FinishRegionDescription
    PDU-US-20BBlackUSA20 Way Vertical PDU
    PDU-UK-20BBlackUK20 Way Vertical PDU
    PDU-EU-20BBlackEurope20 Way Vertical PDU
    PDU-AU-20BBlackAustralia20 Way Vertical PDU
    PDU-CN-20BBlackChina20 Way Vertical PDU

    HSM6FW NEW!

    Image of HSM6FW
    M6 Flat Black Plastic Washer

    HSM6FW NEW!

    Image of HSM6FW
    M6 Flat Black Plastic Washer
    Material: Plastic
    Part No.FinishDescription
    HSM6FWBlackM6 Plastic Washer NEW!

    E0090 Pallet Skid NEW!

    Image of E0090
    Flight case pallet skid.

    Allows cases without wheels or with removable wheels to be handled with fork lift or pallet truck.

    E0090 Pallet Skid NEW!

    Image of E0090
    Image of E0090 Image of E0090
    Flight case pallet skid.

    Allows cases without wheels or with removable wheels to be handled with fork lift or pallet truck.
    Material: 3.25mm / 1/8" Aluminium 6063-T5
    Part No.LengthWeight
    E00904m / 157"9.44kg/20.81lb

    CM01R NEW!

    Image of CM01R
    1U Vertical Cable Retaining Clip (Sold as a Pair)

    CM01R NEW!

    Image of CM01R
    Image of CM01R Image of CM01R
    1U Vertical Cable Retaining Clip (Sold as a Pair)
    Material: Steel
    Part No.FinishDescription
    CM01RBlackCable Retaining Clip NEW!

    Rack Shelf With Custom Face Plate

    Image of Rack Shelf With Custom Face Plate
    Vented Rack Shelf with CNC cut Magnetic Face Plate.

    Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles.

    Comes with a Clamp Bar for to help ...

    Rack Shelf With Custom Face Plate

    Image of Rack Shelf With Custom Face Plate
    Image of Rack Shelf With Custom Face Plate Image of Rack Shelf With Custom Face Plate Image of Rack Shelf With Custom Face Plate Image of Rack Shelf With Custom Face Plate
    Vented Rack Shelf with CNC cut Magnetic Face Plate.

    Custom Front Panels available for any piece of equipment on the market such as AV equipment or game consoles.

    Comes with a Clamp Bar for to help secure your equipment.

    Material: Steel

    SONOS Wireless HiFi

    Part No.FinishApplicationU Size
    R1498/2UK-SB1
    R1498/2UK-SB2
    R1498/2UK-SB3
    Black1 X SONOS BRIDGE
    2 X SONOS BRIDGE
    3 X SONOS BRIDGE
    2U
    R1498/2UK-SONOS1
    R1498/2UK-SONOS2
    R1498/2UK-SONOS3
    Black1 x SONOS CONNECT
    2 x SONOS CONNECT
    3 x SONOS CONNECT
    2U
    R1498/2UK-S90B1Black1 X SONOS BRIDGE & 1 x SONOS CONNECT2U
    R1498/3UK-SONOSZP120S
    R1498/3UK-SONOSZP120
    Black1 x SONOS CONNECT:AMP
    2 x SONOS CONNECT:AMP
    3U
    R1498/3UK-S12090Black1 x SONOS CONNECT:AMP & 1 x SONOS CONNECT3U
    R1498/3UK-S120B1Black1 X SONOS BRIDGE & 1 x SONOS CONNECT:AMP3U

    Computers

    Part No.FinishApplicationU Size
    R1498/2UK-MACMINIBlackMac Mini2U

    Networks

    Part No.FinishApplicationU Size
    R1498/2UK-CRESTRONBlackCreston MC32U

    Satellite Receivers

    Part No.FinishApplicationU Size
    R1497/2UK-SKYHD
    R1497/2UK-SKY-DRX895
    R1498/2UK-DIRECTTV
    BlackSky DRX890 Sky+HD Box
    Sky DRX895 Sky+HD Box
    DIRECTV HD Receiver
    2U

    Video Game Consoles

    Part No.FinishApplicationU Size
    R1498/3UK-PS3
    R1498/3UK-PS4
    Black
    PS3
    3U
    R1498/3UK-XBOX
    R1498/3UK-XBOX1
    BlackXBOX 360
    XBOX One
    3U
    R1498/2UK-WIIBlackWII2U

    Streaming TV Boxes

    Part No.FinishApplicationU Size
    R1498/1UK-ATV1
    R1498/1UK-ATV2
    Black1 X Apple TV Gen 3
    2 X Apple TV Gen 3
    1U
    R1498/2UK-ATV1
    R1498/2UK-ATV2
    R1498/2UK-ATV3
    Black1 X APPLE TV Gen 4 NEW!
    2 X APPLE TV Gen 4
    3 X APPLE TV Gen 4
    2U
    R1498/1UK-ROKU4Black1 X Roku 4 streaming player NEW! 1U
    R1497/2UK-2TBBlack2U SHELF FOR 1 X Sky+ HD 2TB BOX NEW! 2U
    R1498/2UK-SKYQBlack2U SHELF FOR 1 X SKY Q BOX NEW! 2U
    R1498/2UK-SKYQMINIBlack2U SHELF FOR 1 X SKY Q MINI BOX NEW! 2U
    R1498/2UK-YVT100Black2U SHELF FOR 1 X YOUVIEW HUMAX BOX NEW! 2U

    R2020 Modular Rack Tower

    Image of R2020
    Modular rack tower system with a footprint of only 500mm x 500mm / 19.69" x 19.69" which makes it ideal for installations in tight and restricted spaces.

    Also available in 600mm / 23.62" and 800mm / 31.5" deep versions, w...

    R2020 Modular Rack Tower

    Image of R2020
    Modular rack tower system with a footprint of only 500mm x 500mm / 19.69" x 19.69" which makes it ideal for installations in tight and restricted spaces.

    Also available in 600mm / 23.62" and 800mm / 31.5" deep versions, which include a 1U space for blank, vented, or cable access rack panels in the base.

    Flat Pack comes with:
    - 2 top and base units (pre-punched for castors)
    - 4 rails (choose from 12u to 28u)
    - All the required fasteners
    - Add castors kit: 50mm / 1.97" swivel castors (2 with brakes and 2 without brakes)
    - Add side panels: (only available for R2020-16U); 500mm / 19.69" deep, 16U high

    Rack Tower - 500mm / 19.69" Deep

    Part No.Size (U)
    R2020-12U12U
    R2020-14U14U
    R2020-16U16U
    R2020-18U18U
    R2020-20U20U
    R2020-24U24U
    R2020-25U25U
    R2020-28U28U

    Rack Tower - 600mm / 23.62" Deep

    Part No.Size (U)
    R2020-60-12U12U
    R2020-60-14U14U
    R2020-60-16U16U
    R2020-60-18U18U
    R2020-60-20U20U
    R2020-60-24U24U
    R2020-60-25U25U
    R2020-60-28U28U

    Rack Tower - 800mm / 31.5" Deep

    Part No.Size (U)
    R2020-80-12U12U
    R2020-80-14U14U
    R2020-80-16U16U
    R2020-80-18U18U
    R2020-80-20U20U
    R2020-80-24U24U
    R2020-80-25U25U
    R2020-80-28U28U

    Rack Tower with M6 Rack Rail

    Part No.Size (U)
    R2020-xxU/M6500mm / 19.69" Deep, Replace xx with U size
    R2020-60-xxU/M6600mm / 23.62" Deep, Replace xx with U size
    R2020-80-xxU/M6800mm / 31.5" Deep, Replace xx with U size

    Rack Tower with 10/32 Rack Rail

    Part No.Size (U)
    R2020-xxU/10-32500mm / 19.69" Deep, Replace xx with U size
    R2020-60-xxU/10-32600mm / 23.62" Deep, Replace xx with U size
    R2020-80-xxU/10-32800mm / 31.5" Deep, Replace xx with U size

    Accessories

    Part No.Size (U)
    R2020-CASTOR-KITCastor Kit for R2020 Rack Tower (Fasteners Included)
    R2020-SP-16UPair of Side Panels for R2020-16U NEW!

    R1207 NEW!

    Image of R1207
    Rack Mount Offset Brackets

    Allows to recess rack panels or rack mount equipment

    Sold in pairs

    R1207 NEW!

    Image of R1207
    Image of R1207 Image of R1207 Image of R1207 Image of R1207
    Rack Mount Offset Brackets

    Allows to recess rack panels or rack mount equipment

    Sold in pairs
    Part No.FinishDescription
    R1207-1UBlack1U Rack Mount Offset Brackets NEW!
    R1207-2UBlack2U Rack Mount Offset Brackets NEW!
    Penn Elcom Logo