This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
Home: New Products

FP02-Q-3U NEW!

Image of FP02-Q-3U
Low noise 3U Heat Extraction Units are designed to be fitted into the front or back of a 19-inch rack to suck hot air out of an enclosure. As hot air rises the best results will be achieved by mounting them at the top of the cabinet.

A D...

FP02-Q-3U NEW!

Image of FP02-Q-3U
Image of FP02-Q-3U Image of FP02-Q-3U
Low noise 3U Heat Extraction Units are designed to be fitted into the front or back of a 19-inch rack to suck hot air out of an enclosure. As hot air rises the best results will be achieved by mounting them at the top of the cabinet.

A DC-DC link socket is provided, so two or more units can be linked together; a higher power PSU must be used.

Each extractor can also be controlled by a CRC-TEMP thermal sensor.

Technical Specifications
• Low Noise 22.5dBA (0.3 Sone)
• Air movement: 200CFM (336m³/h) @1,350RPM
• Dimensions: 483mm x 133.4mm x 55mm / 19.02" x 5.25" x 2.17"
• 2 x 9 Bladed 120mm Fans
• High Static Pressure
• Power: 12V DC – 500mA / 2 x DC In/Out Sockets
• 500mA universal PSU supplied
• Fluid Bearings = 2 Year Limited Warrantee

These extractor panels can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor.
Or they can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller.
Use AF-F12 Magnetic Fan Dust Filter Covers.

More Information

Part No.FinishDescriptionWeight
FP02-Q-3UBlack3U Heat Extraction Panel NEW! 1.5Kg / 3.31Lb

H7149/BP NEW!

Image of H7149/BP
Backplate for H7149 Handle

H7149/BP NEW!

Image of H7149/BP
Image of H7149/BP Image of H7149/BP
Backplate for H7149 Handle
Material: 1mm / 20 gauge Steel
Part No.Description
H7149/BPBackplate for H7149 Handle NEW!

1652PLAIN

Image of 1652PLAIN
Cleat Lock #2 without Dimples

1652PLAIN

Image of 1652PLAIN
Image of 1652PLAIN Image of 1652PLAIN
Cleat Lock #2 without Dimples
Material: 1mm / 20 gauge Steel
Part No.FinishDescription
1652PLAINZinc NEW!

Case Automation

Image of Case Automation
10T Cropping and Punching Machine for Rack Rails, Extrusions and Piano Hinges.

-Crop Single and Double Rack Rails (up to 2mm / 0.08")
-Crop 3mm / 1/8" Single USA Rack Rails
-Crop and Punch Single Angl...

Case Automation

Image of Case Automation
Image of Case Automation Image of Case Automation Image of Case Automation Image of Case Automation
10T Cropping and Punching Machine for Rack Rails, Extrusions and Piano Hinges.

-Crop Single and Double Rack Rails (up to 2mm / 0.08")
-Crop 3mm / 1/8" Single USA Rack Rails
-Crop and Punch Single Angle Extrusions
-Crop and Punch Piano Hinges

More Information

Part No.Description
CHC103-10T-1PHSingle-Phase power NEW!
CHC103-10T-3PH3-Phase Power NEW!

R2248-2UK NEW!

Image of R2248-2UK
2U Rack Panel for 16 Euro Modules

R2248-2UK NEW!

Image of R2248-2UK
Image of R2248-2UK Image of R2248-2UK Image of R2248-2UK Image of R2248-2UK
2U Rack Panel for 16 Euro Modules


More Information

Part No.FinishDescriptionWeight
R2248-2UKBlackWith Cable Management NEW! 1.138Kg / 2.51Lb
R1248-2UKBlackPanel only NEW!

Laser Etched Rack Panels

Image of Laser Etched Rack Panels
Penn Elcom anodised black or silver aluminium panels can be customised by removing the anodizing with a laser, leaving a brilliant silver aluminium finish.

This process can also be done on raw materials and standard steel panels. ...

Laser Etched Rack Panels

Image of Laser Etched Rack Panels
Penn Elcom anodised black or silver aluminium panels can be customised by removing the anodizing with a laser, leaving a brilliant silver aluminium finish.

This process can also be done on raw materials and standard steel panels.
Lead time: 7-10 days. Minimum order quantity: 10 units.

Watch our Video

Part No.FinishSize (U)Weight
R1275/1UAKLAZBlack1U NEW! 0.18Kg / 0.4Lb
R1275/1UASLAZSilver1U NEW! 0.18Kg / 0.4Lb

PDU-LC83

Image of PDU-LC83
DJ-Switch 8 Way
8 channel switchboard with IEC outlets on rear.
Fuse on front panel and 8 x IEC male plugs included.

Specifications
Width: 280mm / 11.02"
Length: 482mm / 18.98"
Heigh...

PDU-LC83

Image of PDU-LC83
Image of PDU-LC83 Image of PDU-LC83
DJ-Switch 8 Way
8 channel switchboard with IEC outlets on rear.
Fuse on front panel and 8 x IEC male plugs included.

Specifications
Width: 280mm / 11.02"
Length: 482mm / 18.98"
Height: 44mm / 1.73"
Load per channel: 10A
Total load: 15A
Part No.FinishDescriptionWeight
PDU-LC83GreyDJ-Switch 8 Way NEW! 1.1Kg / 2.43Lb

FT02-Q - Dual Fan Kit NEW!

Image of FT02-Q
Dual Fan Kit for Wall Mount Racks

FT02-Q quiet fan kits are designed to be fitted in pre-punched WM and WMP wall mounted racks. A 1A universal PSU is supplied with the fan kit.

Technical Specifications ...

FT02-Q - Dual Fan Kit NEW!

Image of FT02-Q
Image of FT02-Q Image of FT02-Q Image of FT02-Q
Dual Fan Kit for Wall Mount Racks

FT02-Q quiet fan kits are designed to be fitted in pre-punched WM and WMP wall mounted racks. A 1A universal PSU is supplied with the fan kit.

Technical Specifications
• Air movement: 150CFM (252m/h) @1,350RPM
• Fan Dimensions: (OD) 120 x 120 x 25mm (4" x 4" x 1")
• Fan units: 2 x 9 Bladed 120mm / 4.72" Fans
• Noise levels: 22.5dBA (0.3 Sone).
• Power: 12V DC - 500mA
• Power out: 2 x DC In/Out Sockets

This Fan Unit can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor.
Or it can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller.
DC link cable: CRC-Link

More Information

Part No.FinishDescriptionWeight
FT02-QBlackDual Fan Kit NEW! 0.4Kg / 0.88Lb

R1269 CTF NEW!

Image of R1269 CTF
1U Rack Panel with Integral Cable Support.

R1269 CTF NEW!

Image of R1269 CTF
1U Rack Panel with Integral Cable Support.
Part No.FinishDescription
R1269/1UK/12CTFBlackPunched for 12 D-Series Connectors NEW!

RMS1 1U Steel Rack Maker NEW!

Image of RMS1
1U Steel Rack Maker, for making 1U Rack Cases.

Functions as a Dish, Corners and Braces.

Includes a 1U Rack Mount Bracket, Threaded for M6 Rack Screws.

Works with ...

RMS1 1U Steel Rack Maker NEW!

Image of RMS1
Image of RMS1 Image of RMS1 Image of RMS1
1U Steel Rack Maker, for making 1U Rack Cases.

Functions as a Dish, Corners and Braces.

Includes a 1U Rack Mount Bracket, Threaded for M6 Rack Screws.

Works with L0565 Latch and F0698 Stacking Foot.
Material: Steel
Part No.FinishDescription
RMS1Zinc1U Rack Maker

PD6-UKPC NEW!

Image of PD6-UKPC
This low-profile Power Distribution Unit provides a neat and tidy solution for fast power distribution in stage, studio, and touring environments.

The rugged hardwearing steel casing makes this unit ideal for tough environments where spe...

PD6-UKPC NEW!

Image of PD6-UKPC
This low-profile Power Distribution Unit provides a neat and tidy solution for fast power distribution in stage, studio, and touring environments.

The rugged hardwearing steel casing makes this unit ideal for tough environments where speed and simplicity are critical.

All units are fitted with 6 x 13amp outlets on the top plate and Neutrik 20amp Powercon in and out for linking multiple boxes.

A 20amp push to reset thermal breaker, providing valuable protection and a 10mm fixing thread for mounting on bars or Truss.
Part No.Description
PD6-UKPCNeutrik PowerCon 20amp & 6UK Distribution Unit

Tiltwatch XTR® Tilt Indicators NEW!

Image of Tiltwatch XTR®
The TiltWatch XTR® is a single-use tip indicator used to monitor goods that must remain upright. It turns red if the package is tilted past 80°. However, it remains unaffected by movement due to normal handling conditions.
...

Tiltwatch XTR® Tilt Indicators NEW!

Image of Tiltwatch XTR®
The TiltWatch XTR® is a single-use tip indicator used to monitor goods that must remain upright. It turns red if the package is tilted past 80°. However, it remains unaffected by movement due to normal handling conditions.

The warning label fits over the Tiltwatch XTR® and shows what to do if the tilt detection device has been activated.
Warning label dimensions: 146mm x 222.25mm / 5.75" x 8.75"

Mounting Instructions

TiltWatch

Part No.Description
24101TiltWatch XTR®

Companion Labels

Part No.Description
26101
26102
26103
Single TiltWatch XTR® Warning label
TiltWatch XTR® Warning labels - 200 labels/roll
TiltWatch XTR® Warning labels - 500 labels/roll

R0863-M6 - R0863-1032 Rack Strip

Image of R0863-M6 - R0863-1032
Full Holes Rack Strip with Threaded Holes.

Cuts from 1 space 44.45mm / 1.75" to 45 spaces 2m / 79" are available.

Please specify length (number of spaces) when ordering.

Black...

R0863-M6 - R0863-1032 Rack Strip

Image of R0863-M6 - R0863-1032
Image of R0863-M6 - R0863-1032 Image of R0863-M6 - R0863-1032
Full Holes Rack Strip with Threaded Holes.

Cuts from 1 space 44.45mm / 1.75" to 45 spaces 2m / 79" are available.

Please specify length (number of spaces) when ordering.

Black Powder Coated.


Compatible with S1045 M6 Screws and S1940 - S1941 Cup Washers.
Material: 2.00mm / 14 gauge Steel

M6 Rack Rail

Part No.FinishThicknessDescription
R0863-M6Black2mm / 0.08"From 1 Space to 45 Spaces

10/32 Rack Rail

Part No.FinishThicknessDescription
R0863-1032Black2mm / 0.08" NEW! From 1 Space to 45 Spaces

R0883-M6 - R0883-1032 Rack Strip

Image of R0883-M6 - R0883-1032
Full Hole Rack Strip with M6 or 10/32 Threaded Holes.
Black Powder Coated.

Cuts from 1 space 44.45mm / 1.75" to 45 spaces 2m / 79" are available.

Please spe...

R0883-M6 - R0883-1032 Rack Strip

Image of R0883-M6 - R0883-1032
Image of R0883-M6 - R0883-1032 Image of R0883-M6 - R0883-1032
Full Hole Rack Strip with M6 or 10/32 Threaded Holes.
Black Powder Coated.

Cuts from 1 space 44.45mm / 1.75" to 45 spaces 2m / 79" are available.

Please specify length (number of spaces) when ordering.
Material: 2.0mm / 14 gauge Steel

M6 Rack Rail

Part No.FinishThicknessDescription
R0883-M6Black2mm / 0.08"From 1 Space to 45 Spaces

10/32 Rack Rail

Part No.FinishThicknessDescription
R0883-1032Black2mm / 0.08" NEW! From 1 Space to 45 Spaces

P1132Z NEW!

Image of P1132Z
Hinged Corner Brace, based on B1132 Large Brace.

P1132Z NEW!

Image of P1132Z
Image of P1132Z Image of P1132Z
Hinged Corner Brace, based on B1132 Large Brace.
Material: 1.2mm / 18 gauge Steel
Part No.FinishDescription
P1132ZZinc

L0915-12 CP - L0915-15 CP

Image of L0915-12 CP - L0915-15 CP
Castor Board Catch Plate

L0915-12 CP - L0915-15 CP

Image of L0915-12 CP - L0915-15 CP
Image of L0915-12 CP - L0915-15 CP Image of L0915-12 CP - L0915-15 CP Image of L0915-12 CP - L0915-15 CP
Castor Board Catch Plate
Material: Steel
Part No.FinishDescription
L0915-12Z-CP
L0915-12K-CP
Zinc
Black
Suits 12mm / 1/2" Wood NEW!
L0915-15Z-CP
L0915-15K-CP
Zinc
Black
Suits 15mm / 9/16" Wood NEW!

ShockWatch® 2 Impact Indicators NEW!

Image of ShockWatch® 2
ShockWatch® 2 Impact Indicators are tamper-proof single-use, go/no-go devices that determine if fragile products have been dropped during transit or in storage.
The indicators are not armed until activated by the user.
Tu...

ShockWatch® 2 Impact Indicators NEW!

Image of ShockWatch® 2
Image of ShockWatch® 2 Image of ShockWatch® 2 Image of ShockWatch® 2
ShockWatch® 2 Impact Indicators are tamper-proof single-use, go/no-go devices that determine if fragile products have been dropped during transit or in storage.
The indicators are not armed until activated by the user.
Turn bright red when an impact beyond a specific G-force threshold has occurred.

Each ShockWatch® 2 has a unique identifier to support traceability.

The Warning Label fits over the ShockWatch® and shows what to do if the impact detection device has been activated.
Warning Label Dimensions: 114.3mm x 146.05mm / 4.5" x 5.75"

Not Available in the USA

Mounting Instructions

ShockWatch® 2

Part No.FinishDescriptionSensitivity
48000KYellowSerialized, includes framing label25g
49000KPurpleSerialized, includes framing label35g
50000KRedSerialized, includes framing label50g
51000KOrangeSerialized, includes framing label75g

Companion Labels

Part No.FinishDescriptionSensitivity
26105
26106
26107
Single Warning Label
Warning Labels - 200 Labels per roll
Warning Labels - 500 Labels per roll

SRK Rack Shelf Supports NEW!

Image of SRK Rack Shelf Supports
Rack Shelf Support, for R2020 & Contractor Racks.

Sold in pairs.

SRK Rack Shelf Supports NEW!

Image of SRK Rack Shelf Supports
Image of SRK Rack Shelf Supports Image of SRK Rack Shelf Supports
Rack Shelf Support, for R2020 & Contractor Racks.

Sold in pairs.
Material: Steel

Support Rails for Contractor Racks

Part No.DescriptionLength
SRK-390390mm / 15.35"
SRK-560for C600 Contractor Racks560mm / 22.05"

Support Rails for R2020 Racks

Part No.DescriptionLength
SRK-500For R2020 Range500mm / 19.69"
SRK-600For R2020-60 Range600mm / 23.62"
SRK-800For R2020-80 Range800mm / 31.5"

RP Contractor Rear Panels NEW!

Image of RP Contractor Rear Panels
Slam shut rear panel system for contractor racks.

Comprised of 3 sizes that work together to create all of the rack sizes available in our range.

All Panels are vented and include a 1U space for blank, vented, or cable acces...

RP Contractor Rear Panels NEW!

Image of RP Contractor Rear Panels
Image of RP Contractor Rear Panels Image of RP Contractor Rear Panels
Slam shut rear panel system for contractor racks.

Comprised of 3 sizes that work together to create all of the rack sizes available in our range.

All Panels are vented and include a 1U space for blank, vented, or cable access rack panels.
Material: Steel
Part No.Size (U)Description
RP066UContractor Rear Panels
RP088UContractor Rear Panels
RP1212UContractor Rear Panels

WMKCZ Wall Mount Kit NEW!

Image of WMKCZ
Wall Mount Kit for Credenza Racks & Sleeves.

WMKCZ Wall Mount Kit NEW!

Image of WMKCZ
Image of WMKCZ Image of WMKCZ
Wall Mount Kit for Credenza Racks & Sleeves.
Material: Steel
Part No.Description
WMKCZWall Mount Kit for Credenza Racks & Sleeves NEW!

Wood Effect Shell Kits NEW!

Image of Wood Effect Shell Kits
Wood Effect Laminate Shell Kits for Contractor Racks.

Made from high quality 18mm / 11/16" laminated boards.

Includes Wood Effect Panels and Fixing Screws for fitting to Contractor Racks.

Wood Effect Shell Kits NEW!

Image of Wood Effect Shell Kits
Image of Wood Effect Shell Kits Image of Wood Effect Shell Kits
Wood Effect Laminate Shell Kits for Contractor Racks.

Made from high quality 18mm / 11/16" laminated boards.

Includes Wood Effect Panels and Fixing Screws for fitting to Contractor Racks.

Wood Shell for Contractor Racks

Part No.Size (U)
WR066U
WR088U
WR1212U
WR1616U
WR2020U
WR2424U (Special Order)
WR2828U (Special Order)

Wood Shell for Console Racks

Part No.Size (U)
WCR04-6004U Front / 12U Sloping top
WCR12-60012U Front / 12U Sloping top
WCR16-60016U Front / 12U Sloping top

CR Console Rack Enclosures NEW!

Image of CR Console Rack Enclosures
Flat pack sloping top console flat pack comms and AV rack with a 15 degree 12u sloping top console.

- Front and rear mounting rails
- Well ventilated top, base, front, and side sections
- ...

CR Console Rack Enclosures NEW!

Image of CR Console Rack Enclosures
Image of CR Console Rack Enclosures Image of CR Console Rack Enclosures Image of CR Console Rack Enclosures
Flat pack sloping top console flat pack comms and AV rack with a 15 degree 12u sloping top console.

- Front and rear mounting rails
- Well ventilated top, base, front, and side sections
- Pre punched for Contractor castor base kit
- Optional lockable Contractor front doors
- Optional RSP Contractor rear panels
- Flat pack and easy assembly.

Console Rack Enclosures

Part No.FinishDescription
CR04C600Black Texture4U
CR12C600Black Texture12U
CR16C600Black Texture16U

Accessories

Part No.FinishDescription
CRTOP-600Black TextureLockable Security Cover

VDWR Vertical Wall Rack NEW!

Image of VDWR Vertical Wall Rack
Vertical drop down comms/AV wall mount rack system. Secure and compact system for deploying rack mounted equipment.

- Ships in a convenient flat pack kit
- Ventilated top, base, front, and side sections.
- The top and b...

VDWR Vertical Wall Rack NEW!

Image of VDWR Vertical Wall Rack
Image of VDWR Vertical Wall Rack Image of VDWR Vertical Wall Rack Image of VDWR Vertical Wall Rack
Vertical drop down comms/AV wall mount rack system. Secure and compact system for deploying rack mounted equipment.

- Ships in a convenient flat pack kit
- Ventilated top, base, front, and side sections.
- The top and base are interchangeable with a 1u space for a blank, vented, or cable access panel.
- 2u door mounting fixtures are provided, with an option to add another 2u bracket (vdwr04) or a 2u mixer mount (vdwrmx) on top.
- Maximum equipment depth is 500mm / 19.69" with a combined maximum weight of 20Kg / 44.09Lb.

Enclosure

Part No.FinishDescription
VDWR02BlackDrop Down Wall Mount Rack

Add-on Brackets

Part No.FinishDescription
VDWR04Black2U Add-on Mounting Bracket
VDWRMXBlack2U Add-on Mixer Mounting Bracket

NIOC01 NEW!

Image of NIOC01
3-Legged Corner for use with NIOE01 Double Angle Extrusion.

Not Availa...

NIOC01 NEW!

Image of NIOC01
Image of NIOC01 Image of NIOC01
3-Legged Corner for use with NIOE01 Double Angle Extrusion.

Not Available in the UK
Material: Plastic
Part No.FinishDescription
NIOC01Black3-Legged Corner

NIOC02 NEW!

Image of NIOC02
Groove Corner for use with NIOE02 Groove Extrusion and ...

NIOC02 NEW!

Image of NIOC02
Image of NIOC02 Image of NIOC02
Groove Corner for use with NIOE02 Groove Extrusion and NC-NIO-DAE Double Angle Extrusion.

Not Available in the UK
Material: Plastic
Part No.FinishDescription
NIOC02BlackGroove Corner

NIOC03 NEW!

Image of NIOC03
Lid Maker Corner for use with NIOE03 Lidmaker Extrusion.

Not Availabl...

NIOC03 NEW!

Image of NIOC03
Image of NIOC03 Image of NIOC03
Lid Maker Corner for use with NIOE03 Lidmaker Extrusion.

Not Available in the UK
Material: Plastic
Part No.FinishDescription
NIOC03BlackLidmaker Corner

NIOE02 NEW!

Image of NIOE02
3mm / 1/8" Groove Extrusion forms location at top of case base.
Mates with NIOE03 Lidmaker Ex...

NIOE02 NEW!

Image of NIOE02
Image of NIOE02 Image of NIOE02
3mm / 1/8" Groove Extrusion forms location at top of case base.
Mates with NIOE03 Lidmaker Extrusion.
Use with NIOC02 Groove Corner.

Not Available in the UK
Material: Aluminium
Part No.FinishDescription
NIOE02AluminiumGroove Extrusion

NIOE01 NEW!

Image of NIOE01
3mm / 1/8" Double Angle Extrusion to construct case base framework.
Use with NIOC01 3-Legged ...

NIOE01 NEW!

Image of NIOE01
Image of NIOE01 Image of NIOE01
3mm / 1/8" Double Angle Extrusion to construct case base framework.
Use with NIOC01 3-Legged Corner.

Not Available in the UK
Material: Aluminium
Part No.FinishDescription
NIOE01AluminiumDouble Angle Extrusion

NIOE03 NEW!

Image of NIOE03
3mm / 1/8" Lidmaker Extrusion - 27mm / 1 1/16" deep external.
Mates with NIOE02 Tongue E...

NIOE03 NEW!

Image of NIOE03
Image of NIOE03 Image of NIOE03
3mm / 1/8" Lidmaker Extrusion - 27mm / 1 1/16" deep external.
Mates with NIOE02 Tongue Extrusion.
Use with NIOC03

Not Available in the UK
Material: Aluminium
Part No.FinishDescription
NIOE03AluminiumLidmaker Extrusion

NC-EXO-W50 NEW!

Image of NC-EXO-W50
50mm / 1.97" N-Case Exo Corner Castor.

For use with NC-EXO-DAE Double Angle Extrusion.

...

NC-EXO-W50 NEW!

Image of NC-EXO-W50
Image of NC-EXO-W50 Image of NC-EXO-W50
50mm / 1.97" N-Case Exo Corner Castor.

For use with NC-EXO-DAE Double Angle Extrusion.

Not Available in the UK
Material: Plastic
Part No.FinishDescription
NC-EXO-W50KBlack50mm / 1.97" Corner Castor NEW!
Penn Elcom Logo