This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
  • World IconEnglish
  • Home: New Products

    Wood Effect Shell Kits NEW!

    Image of Wood Effect Shell Kits
    Wood Effect Laminate Shell Kits for Contractor Racks.

    Made from high quality 18mm / 11/16" laminated boards.

    Includes Wood Effect Panels and Fixing Screws for fitting to Contractor Racks.

    Wood Effect Shell Kits NEW!

    Image of Wood Effect Shell Kits
    Image of Wood Effect Shell Kits Image of Wood Effect Shell Kits
    Wood Effect Laminate Shell Kits for Contractor Racks.

    Made from high quality 18mm / 11/16" laminated boards.

    Includes Wood Effect Panels and Fixing Screws for fitting to Contractor Racks.

    Wood Shell for Contractor Racks

    Part No.Size (U)
    WR066U
    WR088U
    WR1212U
    WR1616U
    WR2020U
    WR2424U (Special Order)
    WR2828U (Special Order)

    Wood Shell for Console Racks

    Part No.Size (U)
    WCR04-6004U Front / 12U Sloping top
    WCR12-60012U Front / 12U Sloping top
    WCR16-60016U Front / 12U Sloping top

    CR Console Rack Enclosures NEW!

    Image of CR Console Rack Enclosures
    Flat pack sloping top console flat pack comms and AV rack with a 15 degree 12u sloping top console.

    - Front and rear mounting rails
    - Well ventilated top, base, front, and side sections
    - ...

    CR Console Rack Enclosures NEW!

    Image of CR Console Rack Enclosures
    Image of CR Console Rack Enclosures Image of CR Console Rack Enclosures Image of CR Console Rack Enclosures
    Flat pack sloping top console flat pack comms and AV rack with a 15 degree 12u sloping top console.

    - Front and rear mounting rails
    - Well ventilated top, base, front, and side sections
    - Pre punched for Contractor castor base kit
    - Optional lockable Contractor front doors
    - Optional RSP Contractor rear panels
    - Flat pack and easy assembly.

    Console Rack Enclosures

    Part No.FinishDescription
    CR04C600Black Texture4U
    CR12C600Black Texture12U
    CR16C600Black Texture16U

    VDWR Vertical Wall Rack NEW!

    Image of VDWR Vertical Wall Rack
    Vertical drop down comms/AV wall mount rack system. Secure and compact system for deploying rack mounted equipment.

    - Ships in a convenient flat pack kit
    - Ventilated top, base, front, and side sections.
    - The top and b...

    VDWR Vertical Wall Rack NEW!

    Image of VDWR Vertical Wall Rack
    Image of VDWR Vertical Wall Rack Image of VDWR Vertical Wall Rack Image of VDWR Vertical Wall Rack
    Vertical drop down comms/AV wall mount rack system. Secure and compact system for deploying rack mounted equipment.

    - Ships in a convenient flat pack kit
    - Ventilated top, base, front, and side sections.
    - The top and base are interchangeable with a 1u space for a blank, vented, or cable access panel.
    - 2u door mounting fixtures are provided, with an option to add another 2u bracket (vdwr04) or a 2u mixer mount (vdwrmx) on top.
    - Maximum equipment depth is 500mm / 19.69" with a combined maximum weight of 20kg/44.09lb.

    Enclosure

    Part No.FinishDescription
    VDWR02BlackDrop Down Wall Mount Rack

    Add-on Brackets

    Part No.FinishDescription
    VDWR04Black2U Add-on Mounting Bracket
    VDWRMXBlack2U Add-on Mixer Mounting Bracket

    NIOC01 NEW!

    Image of NIOC01
    3-Legged Corner for use with NIOE01 Double Angle Extrusion.

    Not Availa...

    NIOC01 NEW!

    Image of NIOC01
    Image of NIOC01 Image of NIOC01
    3-Legged Corner for use with NIOE01 Double Angle Extrusion.

    Not Available in the UK
    Material: Plastic
    Part No.FinishDescription
    NIOC01Black3-Legged Corner

    NIOC02 NEW!

    Image of NIOC02
    Groove Corner for use with NIOE02 Groove Extrusion and ...

    NIOC02 NEW!

    Image of NIOC02
    Image of NIOC02 Image of NIOC02
    Groove Corner for use with NIOE02 Groove Extrusion and NC-NIO-DAE Double Angle Extrusion.

    Not Available in the UK
    Material: Plastic
    Part No.FinishDescription
    NIOC02BlackGroove Corner

    NIOC03 NEW!

    Image of NIOC03
    Lid Maker Corner for use with NIOE03 Lidmaker Extrusion.

    Not Availabl...

    NIOC03 NEW!

    Image of NIOC03
    Image of NIOC03 Image of NIOC03
    Lid Maker Corner for use with NIOE03 Lidmaker Extrusion.

    Not Available in the UK
    Material: Plastic
    Part No.FinishDescription
    NIOC03BlackLidmaker Corner

    NIOE02 NEW!

    Image of NIOE02
    3mm / 1/8" Groove Extrusion forms location at top of case base.
    Mates with NIOE03 Lidmaker Ex...

    NIOE02 NEW!

    Image of NIOE02
    Image of NIOE02 Image of NIOE02
    3mm / 1/8" Groove Extrusion forms location at top of case base.
    Mates with NIOE03 Lidmaker Extrusion.
    Use with NIOC02 Groove Corner.

    Not Available in the UK
    Material: Aluminium
    Part No.FinishDescription
    NIOE02AluminiumGroove Extrusion

    NIOE01 NEW!

    Image of NIOE01
    3mm / 1/8" Double Angle Extrusion to construct case base framework.
    Use with NIOC01 3-Legged ...

    NIOE01 NEW!

    Image of NIOE01
    Image of NIOE01 Image of NIOE01
    3mm / 1/8" Double Angle Extrusion to construct case base framework.
    Use with NIOC01 3-Legged Corner.

    Not Available in the UK
    Material: Aluminium
    Part No.FinishDescription
    NIOE01AluminiumDouble Angle Extrusion

    NIOE03 NEW!

    Image of NIOE03
    3mm / 1/8" Lidmaker Extrusion - 27mm / 1 1/16" deep external.
    Mates with NIOE02 Tongue E...

    NIOE03 NEW!

    Image of NIOE03
    Image of NIOE03 Image of NIOE03
    3mm / 1/8" Lidmaker Extrusion - 27mm / 1 1/16" deep external.
    Mates with NIOE02 Tongue Extrusion.
    Use with NIOC03

    Not Available in the UK
    Material: Aluminium
    Part No.FinishDescription
    NIOE03AluminiumLidmaker Extrusion

    NC-EXO-W50 NEW!

    Image of NC-EXO-W50
    50mm / 1.97" N-Case Exo Corner Castor.

    For use with NC-EXO-DAE Double Angle Extrusion.

    ...

    NC-EXO-W50 NEW!

    Image of NC-EXO-W50
    Image of NC-EXO-W50 Image of NC-EXO-W50
    50mm / 1.97" N-Case Exo Corner Castor.

    For use with NC-EXO-DAE Double Angle Extrusion.

    Not Available in the UK
    Material: Plastic
    Part No.FinishDescription
    NC-EXO-W50KBlack50mm / 1.97" Corner Castor NEW!

    NC-EXO-LC65K NEW!

    Image of NC-EXO-LC65K
    Lidmaker Corner Kit for use with NC-EXO-LE65K Lidmaker Extrusion.
    Rigid plastic corn...

    NC-EXO-LC65K NEW!

    Image of NC-EXO-LC65K
    Image of NC-EXO-LC65K Image of NC-EXO-LC65K
    Lidmaker Corner Kit for use with NC-EXO-LE65K Lidmaker Extrusion.
    Rigid plastic corner with over-moulded soft rubber exterior for impact absorption.
    Includes Aluminium support brackets and assembly screws.

    Not Available in the UK
    Material: Plastic/Rubber & Aluminium
    Part No.FinishDescription
    NC-EXO-LC65KBlackLidmaker Corner Kit

    NC-EXO-G5 NEW!

    Image of NC-EXO-G5
    Ø5mm / 3/16" Dust Proof Gasket.
    For use with NC-EXO-LE65K Lidmaker Extrusion & ...

    NC-EXO-G5 NEW!

    Image of NC-EXO-G5
    Ø5mm / 3/16" Dust Proof Gasket.
    For use with NC-EXO-LE65K Lidmaker Extrusion & NC-EXO-GE Groove Extrusion.

    Not Available in the UK
    Part No.Description
    NC-EXO-G5Ø5mm / 3/16" Dust Proof Gasket

    NC-EXO-GCK NEW!

    Image of NC-EXO-GCK
    Groove Corner Kit for use with NC-EXO-GE Groove Extrusion and ...

    NC-EXO-GCK NEW!

    Image of NC-EXO-GCK
    Image of NC-EXO-GCK Image of NC-EXO-GCK
    Groove Corner Kit for use with NC-EXO-GE Groove Extrusion and NC-EXO-DAE Double Angle Extrusion.
    Rigid plastic corner with Aluminium support brackets.

    Not Available in the UK
    Material: Plastic & Aluminium
    Part No.FinishDescription
    NC-EXO-GCKBlackGrooved Corner Kit

    NC-EXO-TCK NEW!

    Image of NC-EXO-TCK
    Tongue Corner Kit for use with NC-EXO-TE Groove Extrusion and ...

    NC-EXO-TCK NEW!

    Image of NC-EXO-TCK
    Image of NC-EXO-TCK Image of NC-EXO-TCK
    Tongue Corner Kit for use with NC-EXO-TE Groove Extrusion and NC-EXO-DAE Double Angle Extrusion.
    Rigid plastic corner with Aluminium support brackets.

    Not Available in the UK
    Material: Plastic/Rubber & Aluminium
    Part No.FinishDescription
    NC-EXO-TCKBlackTongue Corner Kit NEW!

    NC-EXO-C3K NEW!

    Image of NC-EXO-C3K
    3-Legged Corner Kit for use with NC-EXO-DAE Double Angle Extrusion.
    Rigid plastic corner...

    NC-EXO-C3K NEW!

    Image of NC-EXO-C3K
    Image of NC-EXO-C3K Image of NC-EXO-C3K
    3-Legged Corner Kit for use with NC-EXO-DAE Double Angle Extrusion.
    Rigid plastic corner with over-moulded soft rubber exterior for impact absorption.
    Includes Aluminium support bracket and M6 screw.

    Not Available in the UK
    Material: Plastic/Rubber & Aluminium
    Part No.FinishDescription
    NC-EXO-C3KBlack3-Legged Corner Kit NEW!

    NC-EXO-DAE NEW!

    Image of NC-EXO-DAE
    7.5mm / 5/16" Double Angle Extrusion to construct case base and deep lid framework.
    Use with NC-...

    NC-EXO-DAE NEW!

    Image of NC-EXO-DAE
    Image of NC-EXO-DAE Image of NC-EXO-DAE
    7.5mm / 5/16" Double Angle Extrusion to construct case base and deep lid framework.
    Use with NC-EXO-C3K 3-Legged Corner assembly and NC-EXO-DATK Double Angle Trim.

    Not Available in the UK
    Material: Aluminium
    Part No.FinishDescription
    NC-EXO-DAEAluminiumDouble Angle Extrusion

    NC-EXO-LE65 NEW!

    Image of NC-EXO-LE65
    7.5mm / 5/16" Lidmaker Extrusion - 65mm / 2.56" deep external.
    With gasket slot for NC-EXO-G5...

    NC-EXO-LE65 NEW!

    Image of NC-EXO-LE65
    Image of NC-EXO-LE65 Image of NC-EXO-LE65
    7.5mm / 5/16" Lidmaker Extrusion - 65mm / 2.56" deep external.
    With gasket slot for NC-EXO-G5 Gasket and built-in striker feature for Overlatches such as L2737 or L2747
    Mates with NC-EXO-TE Tongue Extrusion.
    Use with NC-EXO-LC65K Lidmaker Corner assembly

    Not Available in the UK
    Part No.FinishDescription
    NC-EXO-LE65KBlackLidmaker Extrusion

    NC-EXO-TE NEW!

    Image of NC-EXO-TE
    7.5mm / 5/16" Tongue Extrusion forms location at top of case base.
    Mates with NC-EXO-GE...

    NC-EXO-TE NEW!

    Image of NC-EXO-TE
    Image of NC-EXO-TE Image of NC-EXO-TE
    7.5mm / 5/16" Tongue Extrusion forms location at top of case base.
    Mates with NC-EXO-GE Groove Extrusion or NC-EXO-LE65 Lidmaker Extrusion.
    Use with NC-EXO-TCK Tongue Corner assembly.

    Not Available in the UK
    Part No.FinishDescription
    NC-EXO-TEBlackTongue Extrusion

    NC-EXO-GE NEW!

    Image of NC-EXO-GE
    7.5mm / 5/16" Groove Extrusion with gasket slot for NC-EXO-G5 Gasket. Forms location at botto...

    NC-EXO-GE NEW!

    Image of NC-EXO-GE
    Image of NC-EXO-GE Image of NC-EXO-GE
    7.5mm / 5/16" Groove Extrusion with gasket slot for NC-EXO-G5 Gasket. Forms location at bottom of a deep lid.
    Mates with NC-EXO-TE Tonge Extrusion.
    Use with NC-EXO-GCK Groove Corner assembly.

    Not Available in the UK
    Part No.FinishDescription
    NC-EXO-GEBlackGroove Extrusion

    NC-EXO-DATK NEW!

    Image of NC-EXO-DATK
    Double Angle Trim for use with NC-EXO-DAE Double Angle Extrusion or ...

    NC-EXO-DATK NEW!

    Image of NC-EXO-DATK
    Image of NC-EXO-DATK Image of NC-EXO-DATK
    Double Angle Trim for use with NC-EXO-DAE Double Angle Extrusion or NC-EXO-LE65K Lidmaker Extrusion.

    Not Available in the UK
    Material: Plastic
    Part No.FinishDescription
    NC-EXO-DATKBlackDouble Angle Trim

    SAS Speaker Stands

    Image of SAS
    Speaker Stand. Articulated, fold down, with Removable base.

    Max Load: 272Kg / 600LB

    SAS Speaker Stands

    Image of SAS
    Image of SAS Image of SAS
    Speaker Stand. Articulated, fold down, with Removable base.

    Max Load: 272Kg / 600LB
    Material: Aluminium/Steel
    Part No.FinishSpanMax HeightFootprintWeight
    SAS-4M-24-BBlack610mm / 24"4m / 158"1..06m x 1m / 41.72" x 39.55"46.72kg/103lb
    SAS-4M-36-BBlack914mm / 36"4m / 158"1.37m x 1m / 54.2" x 39.55"49.9kg/110lb
    SAS-5M-36-BBlack914mm / 36" NEW! 5m / 197"1.37m x 1.32m / 54.2" x 52"54.54kg/120.24lb

    RADM-23 - 1U LED Rack Light NEW!

    Image of RADM-23
    1U LED Rack Light for use in 19 inch equipment racks and can be fitted at the front or back of the rack.

    Cool White LED Strip (6500K)
    IP Rating 65 (moisture resistant)
    12V DC Operation with Switch
    Universal PSU Suppli...

    RADM-23 - 1U LED Rack Light NEW!

    Image of RADM-23
    Image of RADM-23 Image of RADM-23 Image of RADM-23
    1U LED Rack Light for use in 19 inch equipment racks and can be fitted at the front or back of the rack.

    Cool White LED Strip (6500K)
    IP Rating 65 (moisture resistant)
    12V DC Operation with Switch
    Universal PSU Supplied (CE & UL Approved)

    Material: Steel
    Part No.FinishDescriptionWeight
    RADM-23Black1U LED Rack Light0.81kg/1.79lb

    L2472 NEW!

    Image of L2472
    Lockable Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case.

    Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. ...

    L2472 NEW!

    Image of L2472
    Image of L2472 Image of L2472
    Lockable Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case.

    Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off.

    Can be used with Extrusion E0490, Corner C0675/30 and Hook P2472
    Part No.Description
    L2472

    L2471 NEW!

    Image of L2471
    Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case.

    Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and dis...

    L2471 NEW!

    Image of L2471
    Image of L2471 Image of L2471 Image of L2471
    Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case.

    Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off.

    Can be used with Extrusion E0490, Corner C0675/30 and Hook P2472
    Part No.Description
    L2471

    H7159EZ/SPT Split Dish Handle NEW!

    Image of H7159EZ/SPT
    Heavy Duty Rivet Protected Recessed Handle in Split Dish.

    Double Sprung

    8mm / 5/16" Bail with 17mm / 11/16" Grip

    H7159EZ/SPT Split Dish Handle NEW!

    Image of H7159EZ/SPT
    Image of H7159EZ/SPT Image of H7159EZ/SPT Image of H7159EZ/SPT
    Heavy Duty Rivet Protected Recessed Handle in Split Dish.

    Double Sprung

    8mm / 5/16" Bail with 17mm / 11/16" Grip
    Part No.FinishDescriptionWeight
    H7159EZ/SPTPennBrite0.38kg/0.83lb

    L905/55/915Z Crating Latch NEW!

    Image of L905/55/915Z
    Medium Latch with Lid Catch Plate.

    For use with wooden crate panels 18mm / 11/16" thick.

    L905/55/915Z Crating Latch NEW!

    Image of L905/55/915Z
    Image of L905/55/915Z Image of L905/55/915Z Image of L905/55/915Z
    Medium Latch with Lid Catch Plate.

    For use with wooden crate panels 18mm / 11/16" thick.
    Material: Steel
    Part No.FinishDescriptionWeight
    L905/55/915ZPennbriteMedium Latch with Lid Catch Plate
    L090555/CPZincLid Catch Plate NEW! 54g/0.12lb

    L787SM Surface Mount Rotary Cam Latch NEW!

    Image of L787SM
    Surface Mount Rotary Cam Latch

    Design Patent Pending.

    L787SM Surface Mount Rotary Cam Latch NEW!

    Image of L787SM
    Image of L787SM Image of L787SM Image of L787SM
    Surface Mount Rotary Cam Latch

    Design Patent Pending.
    Part No.FinishDescription
    L787SMPennBrite

    L2572-CP NEW!

    Image of L2572-CP
    Catch Plate for L2572 Slam Latch.

    Suits Extrusion ...

    L2572-CP NEW!

    Image of L2572-CP
    Image of L2572-CP Image of L2572-CP Image of L2572-CP
    Catch Plate for L2572 Slam Latch.

    Suits Extrusion E0490
    Material: 1.5mm / 16 gauge Steel
    Part No.FinishDescription
    L2572-CPPennBrite

    H2433 NEW!

    Image of H2433
    Briefcase Swivel Handle

    Fixings: M4X14 Pan Head Pozi Screws

    H2433 NEW!

    Image of H2433
    Image of H2433 Image of H2433
    Briefcase Swivel Handle

    Fixings: M4X14 Pan Head Pozi Screws
    Material: Plastic
    Part No.FinishDescription
    H2433SSilver
    H2433KBlack

    L787 Rotary Cam Latch NEW!

    Image of L787
    Rotary Cam Latch in Medium Dish.

    Design Patent Pending.

    L787 Rotary Cam Latch NEW!

    Image of L787
    Image of L787 Image of L787 Image of L787 Image of L787
    Rotary Cam Latch in Medium Dish.

    Design Patent Pending.
    Material: 1.2mm / 18 gauge Steel
    Part No.FinishDescriptionOffset
    L787PennBritePlain DishNo
    L787/22ZPennBriteOffset Dish22mm / 7/8"
    L787/27ZPennBriteOffset Dish27mm / 1 1/16"
    Penn Elcom Logo