Accessories

(1 To 25 Of 25)

SCL

Image of SCL
Dust protection cover for most speakON and powerCON chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.

SCL

Image of SCL
Dust protection cover for most speakON and powerCON chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.
Material: Plastic
Part No.Description
SCL

SCM

Image of SCM
Dust protection cover for male chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.

SCM

Image of SCM
Dust protection cover for male chassis connectors to use when no cable connector is mated. Easy to use, it does not block the connectors in the panel below when not in use.
Part No.Description
SCM

SCF

Image of SCF
The handy dust protection cover for female chassis connectors can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.

SCF

Image of SCF
The handy dust protection cover for female chassis connectors can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.
Material: Plastic
Part No.Description
SCF

SCDX

Image of SCDX
Hinged cover for all D-size chassis connectors

This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colours.

SCDX - black (if used ...

SCDX

Image of SCDX
Image of SCDX Image of SCDX
Hinged cover for all D-size chassis connectors

This hinged cover seals D-size chassis connectors from water, dust and dirt in unmated condition according to IP42. It is available in different colours.

SCDX - black (if used with opticalCON, black indicates multi-mode)
SCDX-5 - green (if used with opticalCON, green indicates single-mode APC)
SCDX-6 - blue (if used with opticalCON, blue indicates single-mode PC)
SCDX-9 - white (e.g. wall outlet)
Material: Plastic
Part No.Description
SCDX

SCDR

Image of SCDR
Soft plastic cover for the rear end of several D-size chassis connectors. It is used to protect the gap between connector and cable.
The protection cover works with all common wires and cables - you simply cut off the cover end to the ...

SCDR

Image of SCDR
Image of SCDR Image of SCDR
Soft plastic cover for the rear end of several D-size chassis connectors. It is used to protect the gap between connector and cable.
The protection cover works with all common wires and cables - you simply cut off the cover end to the preferred diameter.
Material: Plastic
Part No.Description
SCDR

NDL

Image of NDL
The dummyPLUG NDL for most Neutrik speakON and powerCON chassis enables you to simplify cabling.
Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

NDL

Image of NDL
The dummyPLUG NDL for most Neutrik speakON and powerCON chassis enables you to simplify cabling.
Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
Material: Plastic
Part No.Description
NDL

NDF

Image of NDF
The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling.
Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

NDF

Image of NDF
The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling.
Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
Material: Plastic
Part No.Description
NDF

NDM

Image of NDM
The dummyPLUG NDM for Neutrik male XLR receptacles enable you to simplify cabling.
Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

NDM

Image of NDM
The dummyPLUG NDM for Neutrik male XLR receptacles enable you to simplify cabling.
Unused inputs can be covered to avoid miss wiring and protect against dust additionally.
Material: Plastic
Part No.Description
NDM

COMFD

Image of COMFD
Fixing plate with M3 thread for efficient and easy mounting of all D-sized chassis connectors

COMFD

Image of COMFD
Image of COMFD Image of COMFD
Fixing plate with M3 thread for efficient and easy mounting of all D-sized chassis connectors
Material: Plastic
Part No.Description
COMFDFixing plate for D-sized chassis connectors NEW!

COMFG

Image of COMFG
Fixing plate with M3 thread for efficient and easy mounting of all G-sized chassis connectors

COMFG

Image of COMFG
Fixing plate with M3 thread for efficient and easy mounting of all G-sized chassis connectors
Part No.Description
COMFGFixing plate for G-sized chassis connectors NEW!

SCNLT

Image of SCNLT
Gasket for speakON G-size housings for an airtight connection between chassis and frontpanel (also suitable for Amphenol EP cutouts).

SCNLT

Image of SCNLT
Gasket for speakON G-size housings for an airtight connection between chassis and frontpanel (also suitable for Amphenol EP cutouts).
Material: Plastic
Part No.Description
SCNLT

MI8

Image of MI8
Male insert for cable and chassis connectors

The modular system of the miniCON series offers the possibility to assemble a desired connector from a wide range of various parts. Including additional parts for special versions (e.g. cable ...

MI8

Image of MI8
Male insert for cable and chassis connectors

The modular system of the miniCON series offers the possibility to assemble a desired connector from a wide range of various parts. Including additional parts for special versions (e.g. cable connector extension, crimp set, ...).

The neutriCON connectors are designed for multipin/industrial applications in harsh and demanding environment. The very robust all metal circular connector offers easy and screwless assembly, flexible part combination and a push-pull locking mechanism.

Features & Benefits
-Contact configuration can be selected from 1 to 8 contacts
-Easy assembly: Contact soldering / crimping in disassembled condition avoids awkward wiring of high density contacts.
-Precise and robust all metal housing
-Push-pull self-locking system
-Coding system possible (polarization)
Material: Plastic
Part No.Description
MI8

BSPx

Image of BSPx
Coloured boots for for NPC series Jacks + Neutricon

BSPx

Image of BSPx
Coloured boots for for NPC series Jacks + Neutricon
Material: Plastic
Part No.DescriptionColor coding
BSP0Coloured bootsBlack
BSP1Coloured bootsBrown
BSP2Coloured bootsRed
BSP3Coloured bootsOrange
BSP4Coloured bootsYellow
BSP5Coloured bootsGreen
BSP6Coloured bootsBlue
BSP7Coloured bootsViolet
BSP8Coloured bootsGrey
BSP9Coloured bootsWhite

BXXx

Image of BXXx
Bushings for colour coding.

BXXx

Image of BXXx
Bushings for colour coding.
Material: Plastic
Part No.DescriptionColor coding
BXX0Coloured bushingBlack
BXX1Coloured bushingBrown
BXX2Coloured bushingRed
BXX3Coloured bushingOrange
BXX4Coloured bootsYellow
BXX5Coloured bushingGreen
BXX6Coloured bushingBlue
BXX7Coloured bushingViolet
BXX8Coloured bootsGrey
BXX9Coloured bootsWhite

XXRx

Image of XXRx
Coloured coding rings.

Insert must not be unsoldered to change the colour coding.

XXRx

Image of XXRx
Coloured coding rings.

Insert must not be unsoldered to change the colour coding.
Material: Plastic
Part No.DescriptionColor coding
XXR0Coloured coding ringBlack
XXR1Coloured coding ringBrown
XXR2Coloured coding ringRed
XXR3Coloured coding ringOrange
XXR4Coloured coding ringYellow
XXR5Coloured coding ringGreen
XXR6Coloured coding ringBlue
XXR7Coloured coding ringViolet
XXR8Coloured coding ringGrey
XXR9Coloured coding ringWhite

DSSx

Image of DSSx
Coloured lettering plate for D-shape-connectors

DSSx

Image of DSSx
Coloured lettering plate for D-shape-connectors
Material: Plastic
Part No.DescriptionColor coding
DSS0Coloured lettering plateBlack
DSS1Coloured lettering plateBrown
DSS2Coloured lettering plateRed
DSS3Coloured lettering plateOrange
DSS4Coloured lettering plateYellow
DSS5Coloured lettering plateGreen
DSS6Coloured lettering plateBlue
DSS7Coloured lettering plateViolet
DSS8Coloured lettering plateGrey
DSS9Coloured lettering plateWhite

Cover Plates

Image of Cover Plates
Cover plate to blank off XLR-hole.

Cover Plates

Image of Cover Plates
Cover plate to blank off XLR-hole.
Material: 1.0mm / 20 gauge Steel
Part No.DescriptionWeight
60801-20Cover plate to blank off XLR-hole.0.9Kg / 1.98Lb Per 100
60812-20Cover plate to change XLR-hole to Telejack.0.8Kg / 1.76Lb Per 100
60817-20Cover plate to change XLR-hole to RCA/Phono.0.9Kg / 1.98Lb Per 100
60820-20Cover plate to change XLR-hole to DIN.0.7Kg / 1.54Lb Per 100
60822-20Cover plate to change XLR-hole to BNC.0.9Kg / 1.98Lb Per 100

PXRx

Image of PXRx
Coloured rings with flat label surface for PX-Series.

PXRx

Image of PXRx
Coloured rings with flat label surface for PX-Series.
Material: Plastic
Part No.Colour
PXR0Black
PXR1Brown
PXR2Red
PXR3Orange
PXR4Yellow
PXR5Green
PXR6Blue
PXR7Violet
PXR8Grey
PXR9White

BPXx

Image of BPXx
Coloured boots for PX-Series.

BPXx

Image of BPXx
Coloured boots for PX-Series.
Material: Plastic
Part No.Colour
BPX0Black
BPX1Brown
BPX2Red
BPX3Orange
BPX4Yellow
BPX5Green
BPX6Blue
BPX7Violet
BPX8Grey
BPX9White

XXCR

Image of XXCR
Transparent coding ring which allows an individual customized labeling, branding, coding etc.


Just place an individual coloured and or lettered paper or tape (eg. Brothers) inside the ring.

XXCR

Image of XXCR
Transparent coding ring which allows an individual customized labeling, branding, coding etc.


Just place an individual coloured and or lettered paper or tape (eg. Brothers) inside the ring.
Material: Plastic
Part No.Description
XXCR

NLFASTON

Image of NLFASTON
Faston Receptacle for Speakon Chassis

Faston receptacle with Positive lock for use with NL4MP, NL4MPR, NL8MPR
Wire size: 0.8 - 2 mm
Wiring: flat tabs for 3/16in (FASTON 4.8 x 0.5 mm)

Bag quantity = 100

NLFASTON

Image of NLFASTON
Faston Receptacle for Speakon Chassis

Faston receptacle with Positive lock for use with NL4MP, NL4MPR, NL8MPR
Wire size: 0.8 - 2 mm
Wiring: flat tabs for 3/16in (FASTON 4.8 x 0.5 mm)

Bag quantity = 100
Material: Plastic
Part No.Description
NLFASTON

M1905 D-Series Blanking Plug

Image of M1905
Blanking Plug for XLR/Neutrik D-Series Connector cut-out.

M1905 D-Series Blanking Plug

Image of M1905
Image of M1905 Image of M1905
Blanking Plug for XLR/Neutrik D-Series Connector cut-out.
Material: Plastic
Part No.DescriptionWeight
M19050.015Kg / 0.033Lb

M1906 D-Series Blanking Plug

Image of M1906
Rear Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.

M1906 D-Series Blanking Plug

Image of M1906
Image of M1906 Image of M1906
Rear Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.
Material: Plastic
Part No.DescriptionWeight
M1906Plain0.01Kg / 0.022Lb
M1906/B9Punched for BNC0.01Kg / 0.022Lb
M1906/P7Punched for RCA0.01Kg / 0.022Lb
M1906/T11Punched for Telejack0.01Kg / 0.022Lb
M1906/D16Punched for DIN (16mm)0.01Kg / 0.022Lb
M1906/B13Punched for BNC0.01Kg / 0.022Lb

M1908 D-Series Blanking Plug

Image of M1908
Front Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.

M1908 D-Series Blanking Plug

Image of M1908
Image of M1908 Image of M1908
Front Mount Blanking and Converting Plugs for XLR/Neutrik D-Series Connector cut-out.
Material: Plastic
Part No.DescriptionWeight
M1908Plain0.01Kg / 0.022Lb
M1908/B9Punched for BNC0.01Kg / 0.022Lb
M1908/P7Punched for RCA0.01Kg / 0.022Lb
M1908/T11Punched for Telejack0.01Kg / 0.022Lb
M1908/D16Punched for DIN (16mm)0.01Kg / 0.022Lb
M1908/B13Punched for BNC0.01Kg / 0.022Lb

Rubber Bungs

Image of Rubber Bungs
Rubber bungs for neutriCON chassis connectors and miniCON chassis connectors.

Rubber Bungs

Image of Rubber Bungs
Rubber bungs for neutriCON chassis connectors and miniCON chassis connectors.
Part No.FinishDescription
RBR-BUNG-MINICONBlackBung for miniCON
RBR-BUNG-NEUTRICONBlackBung for neutriCON
Penn Elcom Logo