This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
Home: Gang Boxes & Front Panels

Gang Boxes & Front Panels

(1 To 7 Of 7)

1 Gang Galvanised Steel Box

Image of 1 Gang Galvanised Steel Box
1 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals

25mm / 1" Deep Version:
20mm / 13/16" knockouts, 4 on the back, 2 on each side

47mm / 1.85" Deep Version: ...

1 Gang Galvanised Steel Box

Image of 1 Gang Galvanised Steel Box
Image of 1 Gang Galvanised Steel Box Image of 1 Gang Galvanised Steel Box
1 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals

25mm / 1" Deep Version:
20mm / 13/16" knockouts, 4 on the back, 2 on each side

47mm / 1.85" Deep Version:
20mm / 13/16" knockouts, 4 on the back, 2 on three sides
25mm / 1" Knockout on the bottom
Material: 1mm / 20 gauge Steel
Part No.FinishDescription
HBSGSGalvanised Steel25mm / 1" Deep 1 Gang Galvanised Steel Box
HBDGSGalvanised Steel47mm / 1.85" Deep 1 Gang Galvanised Steel Box

2 Gang Galvanised Steel Box

Image of 2 Gang Galvanised Steel Box
2 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals

25mm / 1" Deep Version:
20mm / 13/16" knockouts, 4 on the back, 2 on each side, 4 on top and bottom

47mm / 1.85" Dee...

2 Gang Galvanised Steel Box

Image of 2 Gang Galvanised Steel Box
Image of 2 Gang Galvanised Steel Box Image of 2 Gang Galvanised Steel Box
2 Gang Galvanised Steel Knock Out Box with Brass Earth Terminals

25mm / 1" Deep Version:
20mm / 13/16" knockouts, 4 on the back, 2 on each side, 4 on top and bottom

47mm / 1.85" Deep Version:
20mm / 13/16" knockouts, 4 on the back, 1 on each side, 2 on top and bottom
25mm / 1" Knockouts, 1 on each side, 2 on top and bottom
Material: 1mm / 20 gauge Steel
Part No.FinishDescription
HBSGDGalvanised Steel25mm / 1" Deep 2 Gang Galvanised Steel Box
HBDGDGalvanised Steel47mm / 1.85" Deep 2 Gang Galvanised Steel Box

1 Gang Pattress Box

Image of 1 Gang Pattress Box
1 Gang Pattress Box with Brass Earth Terminals

Use with 1 Gang Front Panel

Ensu...

1 Gang Pattress Box

Image of 1 Gang Pattress Box
Image of 1 Gang Pattress Box Image of 1 Gang Pattress Box
1 Gang Pattress Box with Brass Earth Terminals

Use with 1 Gang Front Panel

Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product.
Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.

All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested achieved a 99.9% kill rate across all four types of the strains of bacteria – MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
Material: Urea Formaldehyde
Part No.FinishDescription
HBSWSPolar White25mm / 1" Deep 1 Gang Pattress Box
HBSWDPolar White47mm / 1.85" Deep 1 Gang Pattress Box

2 Gang Pattress Box

Image of 2 Gang Pattress Box
2 Gang Pattress Box with Brass Earth Terminals

Use with 2 Gang Front Panel

Ensu...

2 Gang Pattress Box

Image of 2 Gang Pattress Box
Image of 2 Gang Pattress Box Image of 2 Gang Pattress Box
2 Gang Pattress Box with Brass Earth Terminals

Use with 2 Gang Front Panel

Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product.
Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.

All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested achieved a 99.9% kill rate across all four types of the strains of bacteria – MRSA, E-Coli, Salmonella, and Klebsiella Pneumoniae.
Material: Urea Formaldehyde
Part No.FinishDescription
HBDWSPolar White25mm / 1" Deep 2 Gang Pattress Box
HBDWDPolar White47mm / 1.85" Deep 2 Gang Pattress Box

R2355 Multi-Pin Wall Plate

Image of R2355
Plates to install multi-pin connectors into walls.

R2355 Multi-Pin Wall Plate

Image of R2355
Image of R2355 Image of R2355
Plates to install multi-pin connectors into walls.
Part No.DescriptionCentral Hole Ø
R2355-13Multi-Pin Wall Plate 13 PIN31mm / 1.22"
R2355-25Multi-Pin Wall Plate 25 PIN36.5mm / 1.44"
R2355-37Multi-Pin Wall Plate 37 PIN42.55mm / 1.68"
R2355-54Multi-Pin Wall Plate 54 PIN48.95mm / 1.93"
R2355-85Multi-Pin Wall Plate 85 PIN60.15mm / 2.37"

1 Gang Front Panel

Image of 1 Gang Front Panel
Front Panel for 1 Gang Pattress Boxes

Available Plain or Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45).

Includes M3 fixing screws.

1 Gang Front Panel

Image of 1 Gang Front Panel
Image of 1 Gang Front Panel Image of 1 Gang Front Panel
Front Panel for 1 Gang Pattress Boxes

Available Plain or Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45).

Includes M3 fixing screws.
Material: 1.5mm / 16 gauge Steel
Part No.FinishDescriptionConnectorWeight
81511-15BlackPlainBlank0.08Kg / 0.18Lb
81511-20BlackPlain1 x Neutrik D-Series Connector0.08Kg / 0.18Lb
81511-RC
81511-RCS
Black
Silver
Rounded Corners1 x Neutrik D-Series Connector0.08Kg / 0.18Lb
82511-20BlackPlain2 x Neutrik D-Series Connectors0.08Kg / 0.18Lb
82511-RC
82511-RCS
Black
Silver
Rounded Corners2 x Neutrik D-Series Connectors0.08Kg / 0.18Lb
82511-4-20BlackPlain4 x Neutrik D-Series Connectors
82511-4RC
82511-4RCS
Black
Silver
Rounded Corners4 x Neutrik D-Series Connectors0.08Kg / 0.18Lb

2 Gang Front Panel

Image of 2 Gang Front Panel
Front Panel for 2 Gang Pattress Boxes

Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45) or Neutrik A/B-Series Connectors (XLR, RJ45).

Includes M3 fixing screws.

2 Gang Front Panel

Image of 2 Gang Front Panel
Image of 2 Gang Front Panel Image of 2 Gang Front Panel
Front Panel for 2 Gang Pattress Boxes

Punched for Neutrik D-Series Connectors (XLR, SpeakON, RJ45) or Neutrik A/B-Series Connectors (XLR, RJ45).

Includes M3 fixing screws.
Material: 1.5mm / 16 gauge Steel
Part No.FinishDescriptionConnectorWeight
83511-20BlackPlain2 x Neutrik D-Series Connectors0.15Kg / 0.33Lb
83511-RC
83511-RCS
Black
Silver
Rounded Corners2 x Neutrik D-Series Connectors0.15Kg / 0.33Lb
86511-RC
86511-RCS
Black
Silver
Rounded Corners3 x Neutrik D-Series Connectors0.15Kg / 0.33Lb
84511-20BlackPlain4 x Neutrik D-Series Connectors0.15Kg / 0.33Lb
84511-RC
84511-RCS
Black
Silver
Rounded Corners4 x Neutrik D-Series Connectors0.15Kg / 0.33Lb
84511-8RC
84511-8RCS
Black
Silver
Rounded Corners8 x Neutrik D-Series Connectors0.15Kg / 0.33Lb
84511-9D-RC
84511-9D-RCS
Black
Silver
Rounded Corners2 x Neutrik D-Series and 2 x D-Sub 90.15Kg / 0.33Lb
84511-15D-RC
84511-15D-RCS
Black
Silver
Rounded Corners2 x Neutrik D-Series and 2 x D-Sub 150.15Kg / 0.33Lb
84546-20BlackPlain4 x Neutrik A/B-Series Connectors (XLR, RJ45)0.15Kg / 0.33Lb
Penn Elcom Logo